![]() ![]() Use the following steps to set the RBS password. Type ifconfig to verify the RBS IP configuration. Type reload - to put the RBS into the Backup mode again. Danger: Do not type format or the CBU card will be toast and must be sent to Ericsson for repair. Danger: Do not type format or the CBU card will be toast and must be sent to Ericsson for repair.įormat C2 and D drives and enter IP address in the RBS, In the HyperTerm window, type reload - to put the RBS into the Backup mode. Step 1 2 Action Shut off the fan circuit breakers (CB1 and CB2). Use the following steps to format the C and D drives and enter the IP address in the RBS. Rename the C drive to C2.įormat C2 and D drives and enter IP address in the RBS Copy the C and D drives from the node to the laptop (right to left-Download arrow). Set the right window (remote) to show the C and D drives in the window. ![]() ![]() Enter the UserID and Password in their respective fields and click Go. ![]() Enter the node ip address in the IP address field. Set the left window (local) to the newly created directory on the laptop. Stop Symantec if it is loaded and running on the laptop. Use WS_FTP Pro to copy the image from the RBS to a new directory on the laptop.Īction Create a new folder under the root directory of the laptop. Set the default gateway to the RBS IP address value.Set the subnet mask to the subnet mask in the RBS.Set the IP address to 1 higher than the RBS address.Open the TCP/IP properties for the laptop LAN port and: Record the RBS IP address and Subnet Mask. Enter ifconfig to display the RBS IP information. Step 1 2 3 ActionĬonnect the Laptop to the RBS using the RS-232 port and LAN cable. Use the following steps to connect your laptop to the RBS. WCDMA RBS Commissioning Table of ContentsĬonnect to RBS Using Laptop.2 Copy Operational RBS Image to Laptop.3 Format C2 and D drives and enter IP address in the RBS.4 Set RBS Password.7 Perform Initial Software Load.9 Upgrade System Software.11 Cabinet and Equipment Configuration.17 OAM Access Configuration Script.22 Site Equipment Configuration Script.30 Site Complete Configuration Scripts.37 Create Site Complete Configuration Version (CV).40 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |